Nickel 200 and Nickel 201 Buttweld Fittings are manufactured, supplied and exported in seamless, welded, and fabricated construction according to ASTM B366 / ASME SB366, ASME B16.9, ASME B16.28, and MSS SP-43 standards for industrial piping systems.
The product range includes Nickel Alloy Buttweld Elbows, Tees, Reducers, Caps, and Stub Ends supplied in multiple schedules, wall thicknesses, and custom project specifications.
Nickel 200 Pipe Fittings are commonly used for handling alkalis, food processing chemicals, and corrosive media requiring higher thermal and electrical conductivity. Nickel 201 Buttweld Fittings are preferred for elevated temperature applications where lower carbon content is required.
These Nickel Alloy Pipe Fittings are widely used in chemical processing plants, heat exchangers, marine systems, food processing equipment, power generation units, and industrial process piping applications operating under corrosive service conditions.
All fittings are supplied with material test certificates, PMI testing, chemical analysis, mechanical testing, and third-party inspection support as per project requirements.
| Material / Purity | Ni | Fe | Mn | Si | C | S | Cu |
|---|---|---|---|---|---|---|---|
| Alloy 200 | 99.00 | 0.40 | 0.35 | 0.35 | 0.15 | 0.01 | 0.25 |
| Alloy 201 | 99.00 | 0.40 | 0.35 | 0.35 | 0.02 | 0.01 | 0.25 |
| Nickel Alloy 200 | ||
|---|---|---|
| Properties | Metric | Imperial |
| Tensile strength (annealed) | 462 MPa | 67000 psi |
| Yield strength (annealed) | 148 MPa | 21500 psi |
| Elongation at break (annealed prior to test) | 45% | 45% |
| Nickel Alloy 201 | ||
| Properties | Metric | Imperial |
| Tensile strength (annealed) | 403 MPa | 58500 psi |
| Yield strength (annealed) | 103 MPa | 14900 psi |
| Elongation at break (annealed prior to test) | 50% | 50% |
Nickel 200/201 Buttweld Fittings are available in 45 Degree Elbows, 90 Degree Elbows, Tees, Crosses, Reducers, Caps, Stub Ends, Couplings, and other pipe fitting configurations for industrial process piping systems
These Nickel Alloy Pipe Fittings are manufactured in seamless and welded construction according to ASTM B366 / ASME SB366 and ASME B16.9 standards with multiple schedules and wall thickness options.
Nickel 200 Pipe Fittings are commonly used in chemical processing plants, alkali handling equipment, food processing systems, marine applications, and heat exchangers requiring corrosion resistance and higher thermal conductivity.
All Nickel 200/201 Buttweld Fittings undergo PMI testing, chemical analysis, mechanical testing, radiography testing, and third-party inspection before dispatch. Material test certificates and heat number traceability are supplied as per project requirements.
| STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN |
|---|---|---|---|---|---|---|---|
| Nickel 200 | 2.4066 | N02200 | NW 2200 | NA 11 | ??-2 | N-100M | Ni 99.2 |
| Nickel 201 | 2.4068 | N02201 | NW 2201 | NA 12 | ??-2 | - | LC-Ni 99 |
